Size 2 Tibbo Project PCB is perfect for systems with a medium number of I/O lines. Since the board can control a TFT display and a keypad, it is suitable for applications requiring a human-machine interface (HMI).

This product can be used as a bare board or assembled into a size 2 Tibbo Project Box. For HMI applications, the board can also be assembled into the TPB2L box, which features a 320x240 TFT LCD and a 4-button sensor keypad.

Offering 3 tiles for a total of 6 "M" and 6 "C" sockets, the TPP2 can implement configurations with up to four simple serial ports, up to 12 relays, or up to 24 opto-inputs, PWM, and open-collector outputs.

The TPP2 is perfect for data collection and AutoID projects, as well as factory, shop, data center, hotel, and home automation applications. The board contains enough "C" sockets to simultaneously accommodate temperature, humidity, pressure, ambient light, and shock sensors. With the use of appropriate Tibbits the board can even control legacy IR devices by emulating traditional IR remote controls.

Specifications:

• Based on high-performance purpose-built 88MHz T1000 IC
• 10/100BaseT auto-MDIX Ethernet port.
• 3 tiles (6 x "M" + 6 x "C" sockets, 24 control lines):
  • Four "M" sockets with UART capability:
    

    > Baudrates of up to 921,600bps;
    > None/even/odd/mark/space parity modes;
    > 7/8 bits/character modes;
    > Full-duplex mode with optional flow control;
    > Half-duplex mode with direction control;
    > Encoding and decoding of Wiegand and clock/data streams.

  • Six "M" sockets with interrupt capability;
  • One "M" socket with PoE capability.
• Optional Wi-Fi interface (requires GA1000 add-on module).
• Connectors for optional TFT LCD and 4-button sensor keypad.
• 1024KB flash memory for firmware, application, and data.
• 2KB EEPROM for data storage.
• RTC with backup supercapacitor.
• Eight LEDs:
  • Green and red main status LEDs;
  • Yellow Ethernet link LED;
  • Five blue LEDs (can be used for Wi-Fi signal strength indication).
• Onboard buzzer.
• Software- and hardware-controlled onboard PLL.
• Reliable power-on/brown-out reset circuit.
• Power: 250mA @ 5V (100BaseT mode, PLL on, all LEDs off).
• Dimensions: 94x94mm.
• Firmware is upgradeable through the serial port or network.