Size 3 Tibbo Project PCB is ideal for applications that require no human-machine interface (HMI) while calling for a significant number of I/O lines and/or functions.

The TPP3 board can be used to replace dumb PLC controllers or work as a safety, security, or access control device. The TPB3 is also ideal for factory, lab, shop, building, hotel, and home automation projects.

Offering 7 tiles for a total of 14 "M" and 14 "C" sockets, the TPP3 can be used to construct devices with up to four full serial ports, up to 25 relays, or up to 47 opto-inputs, PWM, and open-collector outputs.

Further, the generous number of available Tibbit sockets means you can increase your system's versatility by offering multiple power supply options, such as +5V, +12V, PoE, etc. You can also install multiple power supply Tibbits to increase total available power or provide power redundancy.

This product can be used as a bare board, or assembled into a size 3 Tibbo Project Box.

Specifications:

• Based on high-performance purpose-built 88MHz T1000 IC
• 10/100BaseT auto-MDIX Ethernet port.
• 7 tiles (14 x "M" + 14 x "C" sockets, 47 control lines):
  • Four "M" sockets with UART capability:
    

    > Baudrates of up to 921,600bps;
    > None/even/odd/mark/space parity modes;
    > 7/8 bits/character modes;
    > Full-duplex mode with optional flow control;
    > Half-duplex mode with direction control;
    > Encoding and decoding of Wiegand and clock/data streams.

  • Eight "M" sockets with interrupt capability;
  • One "M" socket with PoE capability.
• Optional Wi-Fi interface (requires GA1000 add-on module).
• 1024KB flash memory for firmware, application, and data.
• 2KB EEPROM for data storage.
• RTC with backup supercapacitor.
• Eight LEDs:
  • Green and red main status LEDs;
  • Yellow Ethernet link LED;
  • Five blue LEDs (can be used for Wi-Fi signal strength indication).
• Onboard buzzer.
• Software- and hardware-controlled onboard PLL.
• Reliable power-on/brown-out reset circuit.
• Power: 250mA @ 5V (100BaseT mode, PLL on, all LEDs off).
• Dimensions: 165x94mm.
• Firmware is upgradeable through the serial port or network.