Superior upgrade to the DS203 device.
Based on the second-generation ASIC (T2000).
The device comes preloaded with a fully functional serial-over-IP application.
10/100BaseT, auto-MDIX Ethernet port.
Optional power-over-Ethernet.
Single-channel RS232 port on DB9M connector:
TX, RX, RTS, CTS, DTR, and DSR lines;
Baudrates of up to 115200bps;
None/even/odd/mark/space parity modes;
7/8 bits/character modes;
Optional RTS/CTS flow control;
"12V" power input on pin 9 of the DB9.
512KB flash memory for firmware, application, and data.
200bytes EEPROM for data storage.
Three LEDs:
Green and red main status LEDs;
Yellow Ethernet link LED.
Power: 12VDC nominal (min. 9V, max. 18V).
Dimensions: 90x48x25mm.
Operating temperature range: -5 ~ 70 C.
Firmware is upgradeable through the serial port or network (including cold upgrade firmware uploads through the network).
CE- and FCC-certified.

Included Accessories:
DIN rail mounting plate
Wall mounting plate and two screws
Optional Accessories:
12V/0.5A adaptor: APR-P0011 (US), APR-P0012 (EU), APR-P0013 (UK)
WAS-1499 straight Ethernet cable*
WAS-P0004(B) DB9M-to-DB9F serial cable (device-to-PC)
WAS-P0005(B) DB9F-to-DB9F serial cable (device-to-device)